Brother PE-DESIGN V7 instruction manual If Photo Stitch 2 Color is selected, Change

Automatically Converting an Image to an Embroidery Pattern (Layout & Editing/Image to Stitch Wizard)

Color Option

	Click on the Change Color button to
	open the Thread Color dialog box if you
Change	wish to change the color of the photo
	stitching. You can also change the
Color
	brand of thread you wish to sew with.
	Select the color and click ok to make the
	color change.
	The top slider is used to adjust the
	brightness. Move the slider to the right
	to increase the brightness or to the left
Brightness /	to decrease the brightness. The bottom
	slider is used to adjust the contrast.
Contrast
	Move the slider to the right to increase
	the contrast or to the left to decrease
	the contrast. Click on Update Preview
	to see changes made.
	Click this button to open the Select
	from Candidates dialog box. Variations
Select from	of the image with different degrees of
	brightness and contrast are displayed.
Candidates
	Click one of the variations, and then
	click OK to apply the settings and
	display a preview of the image.
Update	Click this button to update the
	previewed image after settings have
Preview
	been changed.

7.In the Photo Stitch 1 Parameters dialog box, click Update Preview.

→The previewed image is updated.

8.Click Finish.

→An embroidery pattern is created and displayed in the Design Page.

■If Photo Stitch 2 (Color) is selected

→A Select Mask dialog box similar to the one shown below appears.

a Note:

If the width or height of the image exceeds 500 mm, the following message appears. When this happens, adjust the original image size.

1.From the list at the bottom of the dialog box, select the desired shape that the image will be trimmed to (mask).

b Memo:

With a single-colored background, click Auto Generate to automatically detect the outline of the image.

2.In the image preview box, move the handles of the mask until it surrounds the desired part of the image

c For details on the settings, refer to page 82.

b Memo:

To display the Image Tune dialog box, where you can adjust the image, click Image Tune. (For more details, refer to “Image Tune” on page 83.)

87