Brother PE-DESIGN V7 instruction manual Motif, Pattern1, Pattern2, Row Offset

Arranging Embroidery Designs (Layout & Editing)

Motif stitch

Motif

Selects whether to use pattern 1 or pattern 2 for the motif stitch. If you choose to use both patterns, the data is created to sew alternating rows of the two.

Pattern1 only: Uses only pattern 1 (Default)

Pattern2 only: Uses only pattern 2

Pattern1 and 2: Uses pattern 1 and pattern 2

Select a pattern for the motif stitch.

		Click	, and then, in the Browse dialog box that appeared, select the
		folder containing the .pmf file that you want to use. Double-click the desired
		pattern, or select it, and then click OK.
	Width	Sets the motif pattern width (the direction along the line).
	(horizontal	Range: 2.0–100.0 mm (0.08–3.94 inches)
	length)	Default: 5.0 mm (0.20 inch)
	Height	Sets the motif pattern height (the direction perpendicular to the line).
	(vertical	Range: 2.0–100.0 mm (0.08–3.94 inches)
	length)	Default: 5.0 mm (0.20 inch)
		Sets the horizontal arrangement of the motif pattern.			Normal:
	H-Arrange	For patterns like		, the patterns will be arranged	Mirror:
	(horizontal
		along the line as shown at the right.
	arrangement)				Alternate:
Pattern1
		Sets the vertical arrangement of the motif pattern.
Pattern2					Normal:
	V-Arrange	For patterns like		, the patterns will be arranged	Mirror:
	(vertical	along the line as shown at the right.
	arrangement)				Alternate:
		Sets the horizontal spacing (the direction along the			H-Spacing:
	H-Spacing	line) of motif patterns.
		Minimum: Depending on the pattern
	(horizontal
			A negative value can be specified.
	spacing)
		Maximum: 100.0 mm (3.94 inches)
		Default: 0.0 mm
		Sets the vertical spacing (the direction			V-Spacing:
	V-Spacing	perpendicular to the line) of motif patterns.
		Minimum: Depending on the pattern
	(vertical
			A negative value can be specified.
	spacing)
		Maximum: 100.0 mm (3.94 inches)
		Default: 0.0 mm

	Allows you to rotate the angle of the motif stitch.	135° 90° 45°
	This setting can be specified for patterns other than	180°
	manual punching patterns.		0°
Direction	Range: 0–359 degrees	225°	315°
	Default: 0 degrees
			270°

	Sets the amount of offset for each row.
Row Offset	Range: 0.0–10.0 mm (0.00–0.39 inch)
	Default: 0.0 mm (0.00 inch)
	Sets the pitch of the sewing.
Run Pitch	Range: 1.0–10.0 mm (0.04–0.39 inch)
	Default: 10.0 mm (0.39 inch)

159