Brother PE-DESIGN V7 instruction manual 286

Managing Embroidery Design Files (Design Database)

7.Continue until all embroidery designs that you want to write to an original card are selected.

b Memo:

•During this process, the card capacity indicator allows you to plan which designs you would like to save on an original card. The space used by designs in the writing list appears in blue.

•To rewrite the embroidery files written on

the original card, click to select those files, and move files to the writing list in the same manner.

8.After the embroidery designs to be written to the original card appear in the writing list, click

to write the designs to the card.

→The following message appears.

9.Click OK.

→The embroidery design in the writing list are written to the original card.

a Note:

Do not remove the card or unplug the USB cable while patterns are being written to the card (while the LED indicator is flashing).

10.To check the embroidery design file being

written to the original card, click .

→If a card writer module is connected and if an original card is inserted into the card writer module, the following message appears and the embroidery designs are read from the card.

a Note:

•If no original card is inserted, the following message appears.

•Insert an original card, and then click Retry.

•To quit the operation, click Cancel.

→ appears in the folder pane, and all embroidery designs written to the original card appear in the contents pane.

b Memo:

•Embroidery designs written to the original card appear as “Card Data” in the contents pane.

•To display the contents of the folder in the

contents pane, click . Switch

the display by clicking and

.

286