Brother PE-DESIGN V7 instruction manual 218

Manually Creating Embroidery Patterns From Images (Design Center)

■Line sewing attributes

The available attributes differ depending on the selected sew type. In Beginner mode, not all of the following attributes appear.

Zigzag stitch

	Sets underlay stitching on or off. Use underlay stitching in order to prevent shrinking during
	stitching.
Under sewing	On: Underlay stitching will be sewn.
	Off: Underlay stitching will not be sewn.
	Default: Off
	Sets the width of the zigzag.
Zigzag width	Range: 1.0 – 10.0 mm (0.04 – 0.39 inch)
	Default: 2.0 mm (0.08 inch)
	Sets the number of lines per millimeter (inch).
Density	Range: 1.0 – 7.0 lines per mm (25 – 178 lines per inch)
	Default: 4.5 lines per mm (114 lines per inch)
	Sets half stitching on or off.
	If one side of the zigzag stitching is dense, a half stitch could be	On:
Half Stitch	sewn automatically to provide a more even density.
	Default: Off	Off:
	Sets the shape of sharp corners.
Sharp Corners	Default:

Running stitch

	Sets the pitch of the line sewing.
Run pitch	Range: 1.0 – 10.0 mm (0.04 – 0.39 inch)
	Default: 2.0 mm (0.08 inch)
	Sets the number of times that the border will be sewn.
Run times	Range: 2, 4, 6
	Default: 2
Triple stitch

Run pitch

Sets the pitch of the line sewing. Range: 1.0 – 10.0 mm (0.04 – 0.39 inch) Default: 2.0 mm (0.08 inch)

218