Brother PE-DESIGN V7 instruction manual Preventing overlapping stitching hole sewing

Arranging Embroidery Designs (Layout & Editing)

■Deleting a group of settings from the list

1.In the Load/Save Default Setting dialog box, select the group of settings to be deleted.

2.Click Delete to delete the selected group of settings from the list.

b Memo:

(default) cannot be deleted.

■Recalling a group of settings from the list

1.In the Load/Save Default Setting dialog box, select the group of settings to be recalled.

b Memo:

Only one group of settings can be selected.

2.Click Load.

→The Load/Save Default Setting dialog box closes, and the settings in the Sewing Attribute Setting dialog box change to the saved settings.

b Memo:

To change the saved settings and save the changes, change the settings in the Sewing

Attribute Setting dialog box, click , then click Save as, and then click OK without changing the group name for the settings.

b Memo:

The saved setting can also be used on a different computer. Simply copy sastu.txt from the Settings folder in the PE-DESIGN Ver7 folder (application folder) on the original computer to the Settings folder at the same path on the destination computer.

Preventing overlapping stitching (hole sewing)

By specifying hole sewing, the stitching in overlapping regions will not be sewn twice. Hole sewing can be set only when one region completely encloses another.

1.Select a pair of patterns, for example, a circle included in an oval.

Valid

b Memo:

For a pair to be valid, one of the patterns must be completely enclosed within the other pattern, and not contain text, manual punching patterns or stitch data.

Invalid

2.Click Sew, then Set Hole Sewing.

→If the selected pair can be set for hole sewing, the following message appears.

166