Brother PE-DESIGN V7 instruction manual Changing the grid settings, Moving the background image

Creating Custom Fonts (Font Creator)

3.Drag the handle to adjust the selected background image to the desired size.

b Memo:

This function is not available if no template image has been imported into the work area.

■Moving the background image

1.Click Display, then Modify Template.

→The background image is selected.

2.Move the pointer over a selected background image.

→The shape of the pointer changes to .

3.Drag the background image to the desired location.

b Memo:

This function is not available if no template image has been imported into the work area.

Changing the grid settings

The line spacing in the grid displayed in the work area can be adjusted.

1.Click Display, then Grid Setup.

→The Grid Setting dialog box appears.

2.To display the grid, select the Show Grid check box.

To hide the grid, clear the Show Grid check box.

3.To input the font in a uniform thickness or match vertical and horizontal positions, select the Snap to Grid check box.

b Memo:

The pointer will move by the amount set in Grid interval.

The snap feature works whether or not the grid is displayed.

4.In the Grid Interval box, select the grid spacing.

To select a grid interval of 1/15 of a work area’s edge, click Wide.

To select a grid interval of 1/30 of a work area’s edge, click Medium.

To select a grid interval of 1/90 of a work area’s edge, click Narrow.

5.To display the grid as solid lines, select the with Axes check box.

a Note:

When the Show grid check box is selected and the with Axes check box is cleared, only the intersecting points of the grid will be displayed.

6.Click OK to apply the changes and to close the dialog box.

b Memo:

To close the dialog box without applying the changes to the grid, click Cancel.

255