Brother T76 Remote Commands, Retrieve FAX, Check the receiving status, Change Answer Mode, Exit

Remote Commands

Follow the commands below to access features remotely. When you call the fax machine and enter your Remote Access Code (1 5 9 ), the system will signal you with two short beeps to enter a remote control command.

Remote control commands		Detail Operation
95 Change Fax Forwarding
Setting
	1 OFF	If you hear one long beep, the change is accepted. If you hear
		three short beeps, you cannot change it because the
	2 Fax forwarding
		conditions (ex. registering fax forwarding) have not been
	4 FAX FWD No.
		completed. You can register your fax forwarding number by
		using 4. FAX FWD NO. Once you have registered the
		number, the machine will automatically turn to “FAX FWD
		: ON” mode. Then, receive a Memory Status List by entering
		961. Check the List to make sure the Fax Forwarding
		number you registered is correct. Then enter the
		confirmation command 955. Now the machine will start Fax
		Forwarding.
	6 FAX STORAGE ON	You can set FAX STORAGE ON or OFF.
	7 FAX STORAGE OFF
96 Retrieve FAX
	1 Memory Status List	You must use a remote fax machine in order to receive a List
		or stored fax message(s).
	2 Retrieve all FAX
	3 Erase FAX in the	If you hear one long beep, you can erase fax message(s) from
	memory	the memory.
97 Check the receiving status		You can check whether your fax machine has received any
		fax message(s). If yes, you will hear one long beep. If no,
	1 DOC
		you will hear three short beeps.
98 Change Answer Mode		If you hear one long beep, you can change the answer mode.
		If you hear three short beeps, you cannot change it.
	1 TAD
	2 F/T
	3 FAX
90 Exit		After a long beep, you can exit remote control.

ADVANCED USE

Remote Fax Options (FAX-T74) 53