Cabletron Systems 7000 manual Device Name, IP Address, Location, MAC Address

Models: 7000

1 108
Download 108 pages 51.31 Kb
Page 13
Image 13

Introduction

Device

Name

IP Address

Location

MAC

Address

Figure 1-1. Sample Window Showing Group Boxes

Device Name

Displays the user-deÞned name of the device. The device name can be changed via the System Group window; see the Generic SNMP UserÕs Guide for details.

IP Address

Displays the deviceÕs IP (Internet Protocol) Address; this will be the IP address used to deÞne the device icon. The IP address is assigned via Local Management to the 7X00 Control ModuleÕs internal Host interface; it cannot be changed via SPECTRUM Element Manager. Note that although each interface in the SmartSwitch 7000 hub has its own MAC, or physical, address, only a single IP address is assigned.

Location

Displays the user-deÞned location of the device. The location is entered through the System Group window; see the Generic SNMP UserÕs Guide for details.

MAC Address

Displays the manufacturer-set MAC address associated with the IP address used to deÞne the device icon; this will be the MAC address assigned to the 7X00 Control ModuleÕs internal Host interface. Note that each interface in the SmartSwitch 7000 chassis has its own MAC address; these addresses are factory-set and cannot be altered.

Software Conventions

1-5

Page 13
Image 13
Cabletron Systems 7000 manual Device Name, IP Address, Location, MAC Address