Cabletron Systems 7000 manual Basic Alarm Configuration

Alarm Configuration

Using the Advanced Alarms feature, you can deÞne custom alarms for almost any MIB-II or RMON object, as long as it is present in the device Þrmware and its value is deÞned as an integer (including counters, timeticks, and gauges). All aspects of these alarms are user-selectable: thresholds can be established on either the absolute or delta value for a variable; events can be conÞgured to create a log, generate a trap, or both; and for devices that support the new Actions MIB, events can also be conÞgured to perform any deÞned SNMP SET or series of SETs on device objects. The Advanced Alarms feature also allows you to conÞgure any events you wish to use in conjunction with the Packet Capture functionality. (For more information on using the Packet Capture feature, see the RMON UserÕs Guide.)

The Basic Alarms feature allows you to assign alarms to any interface type; using the Advanced Alarms feature, you need only be sure to select variables appropriate to the interface Ñ Ethernet for Ethernet, Token Ring for Token Ring, etc. Ñ when deÞning your alarms.

As long as there is at least one Ethernet or Fast Ethernet module installed in your

TIP SmartSwitch 7000 chassis, you can use the RMON Alarms feature to conÞgure alarms for MIB objects on FDDI, ATM, and other interfaces that donÕt speciÞcally support RMON: the Basic Alarms window provides MIB II objects as alarm variables; Advanced Alarm conÞguration allows you to select any object as an alarm variable, as long as its value is deÞned as an integer and you assign the correct instance value. See step 5 on page 4-17and the Note which follows it for more information on assigning the correct instance value to an advanced alarm.

Basic Alarm Configuration

Using the Basic Alarm ConÞguration application, you can deÞne both rising and falling alarm thresholds for three selected MIB-II objects: ifInOctets, ifInNUcast, and ifInErrors. Because these pre-selected objects are not RMON-speciÞc, you can conÞgure alarms for all interfaces installed in your SmartSwitch 7000 hub Ñ including those, like FDDI, for which no speciÞc RMON statistics currently exist.

In addition to conÞguring separate rising and falling thresholds, you can also conÞgure your deviceÕs response to an alarm condition: when a threshold is crossed, the RMON device can create a log of alarm events, send a trap notifying your management workstation that an alarm condition has occurred, or both; you can even conÞgure an alarm to enable or disable bridging on the offending port in response to a rising or falling alarm condition.

4-2 Basic Alarm Configuration