![](/images/new-backgrounds/1170416/170416133x1.webp)
Alarm Configuration
To disable an alarm:
1.In the top of the window, click to select the variable for which you wish to disable an alarm: Kilobits, Total Errors, or Broadcast/Multicast.
2.In the list box display, click to highlight the interface(s) for which you wish to disable the selected alarm type. (Remember, you can use
3.Click on . The selected alarm type on the selected interface(s) will be disabled, and the list box display will refresh to reflect those changes.
Viewing the Basic Alarm Log
If you have selected the ÒlogÓ response for an alarm, and that alarmÕs rising and/or falling threshold has been crossed, the Basic Alarms application will create a log of alarm occurrences. If a threshold has been crossed, it will be proceeded in the interface list box display by a double
button; selecting the button will launch the appropriate Basic Alarm Log, Figure
button; you can only view a single alarm log at a time.)
Figure 4-2. Basic Alarm Log
The top portion of the Basic Alarm Log window contains the device information boxes, as well as the Port Number assigned to the interface that experienced the alarm condition and the type of alarm that was triggered; the remainder of the window contains the following information about each alarm occurrence:
Basic Alarm Configuration |