Chapter 4
Never peel off tape [1] that fixes the ink tube when detaching the joints of the ink tube on the upper part of the carriage or when removing the joint base from the carriage.
[1]
10) Twist off belt fixer knob [1] to loosen the belt, and remove spring [2], guide [3] and pulley[4].
[3]
[4]
11)Release carriage belt from the pulley of the carriage motor.
12)Remove two screws [1] and pulley base [2].
13)Remove screw [3] and the connector [4] to release head management sensor unit [5].
14)Remove five screws [6] and lift unit [7].
[2]
[1]
