Chapter 7
(COUNTER)
SETTING
Pth
ON
OFF
RTC
DATE
TIME
INITIALIZE
WARNING
ERROR
ADJUST
CARRIAGE
PURGE
PARTS A
PARTS D
PARTS H1
PARTS K1
PARTS M1
PARTS P1
PARTS V1
PARTS COUNTER
PARTS A
PARTS D
PARTS H1
PARTS K1
PARTS M1
PARTS P1
PARTS V1
7.1.3 Details for Service mode
This section provides details of the Service mode menus.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on
2) SYSTEM
Displays the printer information shown below.
|
| |
|
|
|
Display | Description | Unit |
|
|
|
S/N | Serial number of printer | - |
|
|
|
TYPE | Type setting on main controller PCB | - |
| * iPF8000 is represented by 44. |
|
|
|
|
LF TYPE | Feed roller type: 0 or 1 | - |
|
|
|
TMP | Ambient temperature | degrees C |
|
|
|
SIZE LF | Detected size of loaded media (feed direction) | mm |
| 0 is always detected for the roll media. |
|
|
|
|
SIZE LF | Detected size of loaded media (feed direction) | inch |
| 0 is always detected for the roll media. |
|
|
|
|
SIZE CR | Detected size of loaded media (carriage scan direction) | mm |
|
|
|
SIZE CR | Detected size of loaded media (carriage scan direction) | inch |
|
|
|
3) HEAD
Displays the following EEPROM information of the printhead.
Display | Description |
S/N R | Serial number of printhead R |
|
|
S/N L | Serial number of printhead L |
|
|
LOT R | Lot number of printhead R |
|
|
LOT L | Lot number of printhead L |
|
|
4) INK
Displays the numbers of days passed since installation of the following ink tanks.
Display | Description | Unit |
BK | Number of days passed since the BK ink tank was installed | Day(s) |
|
|
|
MBK | Number of days passed since the MBK ink tank was installed | Day(s) |
|
|
|
