
Chapter 8
Code | Display massage | Status |
Ink tank is empty. Replace the ink tank. | B ink tank is empty | |
|
|
|
Ink tank is empty. Replace the ink tank. | G ink tank is empty | |
|
|
|
No ink tank loaded. Check ink tank. | BK ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | Y ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | M ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | C ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | PM ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | PC ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | MBK ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | GY ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | PGY ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | R ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | B ink tank is not loaded (when printing) | |
|
|
|
No ink tank loaded. Check ink tank. | G ink tank is not loaded (when printing) | |
|
|
|
01031101- | Close Ink Tank Cover | Ink tank cover is opened (when printing) |
|
|
|
GARO W1221 | Unsupported command in GARO image mode | |
|
|
|
GARO W1222 | Invalid number of parameters in GARO image mode (no parameter) | |
|
|
|
GARO W1223 | Required item was omitted in GARO image mode | |
|
|
|
GARO W1225 | Other warning in GARO image mode | |
|
|
|
GARO W1231 | Unsupported command in GARO setting mode | |
|
|
|
GARO W1232 | Invalid number of parameters in GARO setting mode | |
|
|
|
GARO W1233 | Reauired item was omitted in GARO setting mode | |
|
|
|
GARO W1234 | Data out of range in GARO image mode | |
|
|
|
GARO W1235 | Other warning in GARO setting mode | |
|
|
|
Feed Limit.. | Force feed limit | |
|
|
|
Check printed document. | Printhead R not discharging | |
|
|
|
| Printhead L not discharging | |
|
|
|
01060000- | Paper Size Wrong | Media size missmatch |
|
|
|
Paper Type Wrong | Media type missmatch | |
|
|
|
| Prepare for parts replacement. Call for service. | Parts counter warning level 1 (W1) |
|
|
|
| Parts replacement time has passed. Call for service. | Parts counter warning level 2 (W2) |
|
|
|
8.3 Error Table
8.3.1 Errors
The codes correspond to the numbers shown on the DISPLAY in the service mode.
Code | Status |
Media width detection error | |
|
|
Media set position error | |
|
|
Media leading edge not detected | |
|
|
Cut sheet end cannot be detected | |
|
|
Media too small | |
|
|
Media too large | |
|
|
Media became misaligned during feeding | |
|
|
Media right edge not detected | |
|
|
Media left edge not detected | |
|
|
Head resistration improper adjustment | |
|
|
LF improper adjustment | |
|
|
Eccentricity improper adjustment | |
|
|
Printhead check error | |
|
|
Optical axis error | |
|
|
Media feeding failure | |
|
|
Feed error | |
| |
| |
|
|
Ejection error | |
|
|
Media is too small to print adjustment pattern | |
Media became misaligned during printing | |
|
|
Transparent media was loaded and cannot adjust | |
|
|
Media skewed | |
IEEE error | |
|
|
Feed motor time out | |
|
|
Upper cover open error | |
Carriage cover open error | |
|
|
Release lever error | |
|
|