
Contents
Contents
4.1 Service Parts | |
4.1.1 Service parts | |
4.2 Disassembly/Reassembly | |
4.2.1 Diassembly/Reassembly | |
4.3 Points to Note on Disassembly and Reassembly | |
4.3.1 Note on locations prohibited from disassembly | |
4.3.2 Moving the carriage manually | |
4.3.3 Units requiring draining of ink | |
4.3.4 External covers | |
4.3.5 Drive unit | |
4.3.6 Carriage unit | |
4.3.7 Ink tube unit | |
4.3.8 Feeder unit | |
4.3.9 Purge unit | |
4.3.10 Ink tank unit | |
4.3.11 Linear encoder | |
4.3.12 Head management sensor | |
4.3.13 PCBs | |
4.3.14 Opening the cap and moving the wiper unit | |
4.3.15 Opening and closing ink supply valves | |
4.3.16 Draining the ink | |
4.4 Applying the Grease | |
4.4.1 Applying the Grease | |
4.5 Adjustment and Setup Items | |
4.5.1 Action to take after replacing the feed roller HP sensor, feed roller encoder, or feed roller | |
4.5.2 Action to take after replacing the carriage unit or multi sensor | |
4.5.3 Action to take after replacing the head management sensor |