Canon 2163B002 service manual Assembling the Stand, Media take-up unit option

Chapter 3

9	Basket arm R	10	Leg cover (2pcs.)
11	Rod holder adapter (2pcs.)	12	M8 hex bolts (8pcs.)
13	Spanner	14	Hex wrench
15	M4 hex screws (20pcs.)

c) Media take-up unit (option)

2

4

3

1

5

11

10

6

12

89

7

			F-3-5
			T-3-4
1	Weight flange 1 / 2 (2pcs. each)	2	Media take-up unit L
3	Media take-up unit R	4	Media take-up unit mounting bracket L / R
5	Media take-up spool	6	Media take-up sensor unit
7	3-inch adapter (2pcs.)	8	M4 hex screws (16pcs.)
9	Hex wrench	10	Weight joint
11	Weight roll	12	Cord holder (2pcs.)

3.1.2.2Assembling the Stand

Assemble the stand.

Stand assembly requires two or more people working on a flat floor. Assembling the stand alone may cause injury or accidental bending of the stand.

Stand casters are locked at the time of factory shipment. Do not release the lock until the stand has been fully assembled. In addition, release the lock before moving the stand. Moving the stand while the casters are locked may scratch the floor or cause injury.

1)Position the left stand leg and right stand leg so that the markings on the bottom are right-side up and can be read. Insert the left side of the bottom stand stay into the side slot [1] of the left stand leg, and insert the right side of the bottom stand stay into the side slot [2] of the right stand leg.

3-3