Names and Functions of Components, Front | Canon 2163B002 specification

Chapter 1

Compliant with ANSI/EIA/TIA-568A or ANSI/EIA/TIA-568B

(5) Interface connector

Printer side: Compliant with IEEE802.3, ANSI X3.263, ISO/IEC60603-7

c. IEEE1394 (option)

(1) Interface type

Interface compliant with IEEE1394-1995, P1394a (Version 2.0)

(2)Data transfer system Asynchronous transfer

(3)Signal level

Input:

Differential input voltage:

During S100 settlement: +173 mV to +260 mV

During data reception: +142 mV to +260 mV

During S200 settlement: +171 mV to +262 mV

During data reception: +132 mV to +260 mV

During S400 settlement: +168 mV to +265 mV

During data reception: +118 mV to +260 mV Output:

Differential output voltage: +172 mV to +265 mV

(4) Interface cable

Twisted-pair shielded cable, 4.5 m max.

Compliant with IEEE1394-1995 standard or P1394a (Version 2.0) standard

(5) Interface connector

Printer side: 6-pin connector (socket) compliant with IEEE1394 standard

Cable side: 6-pin connector (plug) compliant with IEEE1394 standard

Cable side: RJ-45 type compliant with ANSI/EIA/TIA-568A or ANSI/EIA/TIA-568B

[5]

		[1]	[5]
			[5]
		[2]
		[3]
			[6]
		[4]
			[7]
		[9]
		[10]	[8]
			[8]
		F-1-9
		T-1-3
[1]	Upper cover	Open this cover to install a printhead, load media or clear jammed paper inside the printer.
[2]	Delivery guides	Allow printed paper to be delivered. Open these guides to load a roll.
[3]	Roll holder	Load a roll on this holder.
[4]	Delivery support	Keeps printed paper from being caught by the roll holder or in the paper slot.
[5]	Ink tank cover	Open this cover to replace the ink tank.
[6]	Operation panel	Use this panel to operate the printer and check its status.
[7]	Release lever	Releases the paper retainer. Pull up this lever to front of the printer to load paper.
[8]	Stand	The base on which the printer mounts, furnished with casters.
[9]	Basket	Cloth tray that catches the printed paper.
[10]	Media take-up unit	Takes up printed rolls automatically.

1-6