Cisco Systems 4500 Default 802.1X Configuration

40-27
Software Configuration Guide—Release 15.0(2)SG
OL-23818-01
Chapter 40 Configuring 802.1X Port-Based Authentication Configuring 802.1X Port-Based Authentication
• Configuring 802.1X with Inaccessible Authentication Bypass, page 40-60 (optional)
• Configuring 802.1X with Unidirectional Controlled Port, page 40-63 (optional)
• Configuring 802.1X with VLAN User Distribution, page 40-65
• Configuring 802.1X with Authentication Failed, page 40-68 (optional)
• Configuring 802.1X with Voice VLAN, page 40-70 (optional)
• Configuring 802.1X with VLAN Assignment, page 40-71
• Enabling Fallback Authentication, page 40-73
• Enabling Periodic Reauthentication, page 40-78 (optional)
• Enabling Multiple Hosts, page 40-80 (optional
• Changing the Quiet Period, page 40-81 (optional)
• Changing the Switch-to-Client Retransmission Time, page 40-82 (optional)
• Setting the Switch-to-Client Frame-Retransmission Number, page 40-83 (optional)
• Configuring an Authenticator and a Supplicant Switch with NEAT, page 40-85
• Manually Reauthenticating a Client Connected to a Port, page 40-91 (optional)
• Initializing the 802.1X Authentication State, page 40-91
• Removing 802.1X Client Information, page 40-92
• Resetting the 802.1X Configuration to the Default Values, page 40-92 (optional)
Default 802.1X Configuration
Table 40-1 shows the default 802.1X configuration.
Table 40-1 Default 802.1X Configuration
Feature Default Setting
Authentication, authorization, and accounting (AAA) Disabled
RADIUS server
• IP address
• UDP authentication port
• Key
• None specified
• 1645
• None specified
Per-interface 802.1X protocol enable state Force-authorized
The port transmits and receives normal traffic without
802.1X-based authentication of the client.
Periodic reauthentication Disabled
Time between reauthentication attempts 3600 sec
Quiet period 60 sec
Number of seconds that the switch remains in the quiet state
following a failed authentication exchange with the client.