12-13
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter12 Register DMPs
Procedures
Related Topics
•
Add or Edit Address Ranges for Non-Medianet Autoregistration, page 12-18
•
Elements to Autoregister DMPs, page12-23
Procedures
•
Use DMPDM to Prepare a DMP for Manual Registration, page 12-13
•
Use a System Task to Normalize DMP Passwords, page 12-14
•
Establish Trust Between Digital Signs and your Centrally Managed DMPs, page 12-17
•
Add or Edit Address Ranges for Non-Medianet Autoregistration, page 12-18
•
Delete Address Ranges for Non-Medianet Autoregistration, page 12-20
•
Add or Edit One DMP Manually, page12- 21
•
Delete DMPs Manually from Your Device Inventory, page12-22
Use DMPDM to Prepare a DMP for Manual Registration
When autoregistration is not suitable, such as for testing purposes, you can perform the required steps
manually to register a DMP in DMM. However, you must first prepare the DMP.
Procedure
Step1
Point your browser to the IP address of a DMP that you will manage centrally.
Step2
At the DMPDM login prompt, enter the username and the password that you configured for the DMP.
Step3
Click DMP Management in the Administration area, and then enter the required values.
a.
Enter in the DMM Appliance IP Address field the full and correct IP address of your
DMM appliance.
b.
Enter in the DMM Server Timeout (in seconds) field the maximum number of second s that your
DMP should wait for a response from your DMM appliance.