Cisco Systems 5.4.x Emulate the DMP Remote Control for Use with Cisco Cast

CHAPTER
28-1
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
28
Emulate the DMP Remote Control
for Use with Cisco Cast
Revised: September17, 2012
OL-15762-05
•
Concepts, page 28-1
• Procedures, page 28-4
Note We do not support remote control emulation on a DMP 4310G.
Concepts
• Overview, page28-1
• Restrictions, page 28-2
• Workflow to Provision Emulator Service for IP Phones, page 28-3
Overview
Topics in this section describe a software-based emulator that you can use in place of, or in addition to,
the remote control unit for a DMP.
Note • Although Cisco sells a physical remote control device for use with DMPs that deliver Cisco Cast programming to
their attached displays, the remote control unit is an optional accessory for a DMP.
•To learn about the remote control unit, see its documentation on Cisco.com.
•The emulated remote control supports changing channels for CiscoCast, navigating in the Cisco Cast menu system, and
adjusting audio volume settings for a DMP.
Audience
We prepared this material with specific expectations of you.
You want to emulate the DMP remote control on mobile phones or Cisco IP phones.