28-5
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter28 Emulate the DMP Remote Control for Use with Cisco Cast
Procedures
Start Services
Before You Begin
•
Activate services.
Procedure
Step1
Choose Tools> Control Center - Feature Services.
Step2
Click the Server list and choose from among its options the server where the remote control emulation
service should be started for Cisco Cast.
Step3
Click Go.
Step4
Repeat as many times as necessary until every service is running:
Click the radio button for any service that is not yet running. Then, click Start.
Step5
Stop. You have completed this procedure.
What to Do Next
•
Proceed to the “Configure URL Parameters” section on page 28-5.
Related Topics
•
Activate Services, page 28-4
Configure URL Parameters
Before You Begin
•
Start services.
Procedure
Step1
Choose Cisco Unified CM Administration from the Navigation list. Then, click Go.
Step2
Choose System > Enterprise Parameters. Then, scroll to the Phone URL Parameters area.
Step3
Verify that you have not changed the factory-default values for these parameters.
•
URL Authentication
•
URL Directories
•
URL Information
•
URL Services
Step4
Click Save.
Step5
Stop. You have completed this procedure.