12-21
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter12 Register DMPs
Procedures
Add or Edit One DMP Manually
Before You Begin
•
Log in to DMM.
Procedure
Step1
Click Network and Endpoints.
Step2
Choose Digital Media Players > DMP Manager.
Step3
Do either of the following.
•
Click Add DMP above the DMP List table.
OR
•
Click the name of a DMP group to choose it in the object selector, and then click Edit DMP above
the DMP List table.
Tip Is the Add DMP button missing from your DMP Manager page? If so, something has blocked port 843 on your
switch or router. Open port843 and try again.
Step4
Choose options and enter required values for the DMP.
After you register a DMP manually, its Description value in DMP Manager might be blank, even though
your other DMPs show “registered” as their Description value. This happens only when you have not
entered anything in the Description field. (CSCtr51123)
Step5
Click Submit to save your work.
OR
Click Clear to discard your work.
Step6
(Optional) Add the DMP to a DMP group.
Step7
Schedule a calendar event to deliver or run this application.
Step8
Stop. You have completed this procedure.