13-3
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter13 Organize DMPs in Groups
Procedures
Procedures
•
Add and Edit DMP Groups, page 13-3
•
Delete DMP Groups, page 13-4
•
Add DMPs Manually to DMP Groups, page 13-5
•
Remove DMPs Manually from DMP Groups, page 13-5
•
Filter the DMP List Table, page13-6
Add and Edit DMP Groups
Note DMM uses TCP port7777 to communicate with DMPs. This port is open on DMPs. You cannot close it.
When you create or edit a DMP group, the least that you must do is name the group. In addition, you can
populate the group automatically with all of the DMPs in any CIDR address range that youspecify, or you
can manually add DMPs to a group.
Tip You can save a named group for use in the future, even if you have not yet assigned any DMPs to it.
Before You Begin
•
Log in to DMM.
Procedure
Step1
Click Network and Endpoints.
Step2
Choose Digital Media Players > DMP Manager.
Step3
Do either of the following.
•
Click Create Group.
•
Click a group to highlight it in the tree, and then choose More Actions > Edit Group.
Step4
Enter a name and a description for the group.
Step5
Define the network ranges from which to autoregister DMPs that should join this DMP group.
OR
You can skip this step if you will not autoregister DMPs now.