Cisco Systems 5.4.x Enable IP Phone Autoregistration, Define IP Phone Service Attributes

28-6
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter28 Emula te the DMP Remote Control for Use with Cisco Cast
Procedures
What to Do Next
• Proceed to the “Enable IP Phone Autoregistration” section on page 28-6.
Related Topics
• Start Services, page28-5
Enable IP Phone Autoregistration
Before You Begin
• Configure URL parameters.
Procedure
Step1 Choose System > Cisco Unified CM. Then, click Find.
Step2 Click the name of the server whose managed IP phones should be autoregistered.
Step3 Uncheck the Auto-registration disabled on this Cisco Unified Communications Manager check box.
Step4 Edit the range of values that starts in the Starting Directory Number field and ends in the Ending
Directory Number field.
Step5 Click Save.
Step6 Stop. You have completed this procedure.
What to Do Next
• Proceed to the “Define IP Phone Service Attributes” section on page28-6.
Related Topics
• Configure URL Parameters, page 28-5
Define IP Phone Service Attributes
Before You Begin
• Enable IP phone autoregistration.
Procedure
Step1 Choose Cisco Unified CM Administration from the Navigation list. Then, click Go.
Step2 Choose Device> Device Settings > Phone Services.
Step3 Click Add New.
Step4 Enter Cast in these fields.
• Service Name
• ASCII Service Name