15-7
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter15 Touchscreens, Projec tors, and Displays
Procedures
Before You Begin
•
Obtain an HDMI-to-DVI adapter if your presentation system uses DVI.
Procedure
Step1
Do only one of the following.
Step2
If the presentation system is not already turned on, turn it On now.
Step3
Stop. You have completed this procedure.
Related Topics
•
Video and Audio Signal Interfaces, page 15-30
•
Connect to a Digital Display or Projector, page15- 6
•
Does your
presentation
system
use HDMI?
When you will use HDMI
a.
Connect the HDMI cable to the HDMI interface on the back panel of
your DMP.
b.
Connect the other end of the cable to your presentation system.
c.
Procced to Step2.
•
Does your
presentation
system
use DVI?
When you will use DVI
a.
Connect the HDMI cable to the HDMI interface on the back panel of
your DMP.
b.
Fasten an HDMI-to-‘DVI adapter to the free end of the cable.
c.
Connect the free end of the DVI adapter to the corresponding
interface on your presentation system.
d.
Plug the 3.5mm audio jack into the Audio interface on the back panel
of your DMP.
e.
Connect the other end of the audio cable to the corresponding
interface on your presentation system.
f.
Pproceed to Step2.