15-22
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter15 Touchscreens, Projectors, and Displays
Procedures
Procedure
Step1
Press Menu on the remote control for your 40-inch or 52-inch LCD display.
OR
Press Menu on the LCD display front panel.
Step2
Choose Input > Source List> DVI, and then pres s Enter.
Step3
Choose Input > Edit Name > DVI> HD STB, and then press Enter.
Step4
Stop. You have completed this procedure.
Related Topics
•
Elements to Activate RS-232 for Supported LCD Display Brands (except DMTech), page 15-37
•
RS-232 Commands to Manage Cisco LCD Displays
•
Use Predefined Tasks to Configure and Manage Equipment, page 15-23
HDMI
Support Autodetection
•
Activate or Deactivate HDMI Autodetection, page15-22
•
Activate or Deactivate Resolution Autodetection, page15-23

Activate or Deactivate HDMI Autodetection

Procedure
Step1
Deploy the System Task event called HDMI Display Autotection On.
OR
Deploy the System Task event called HDMI Display Autodetection Off.
Step2
Stop. You have completed this procedure.
Related Topics
•
Elements to Control HDMI Display Autodetection, page 15-36