15-17
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter15 Touchscreens, Projec tors, and Displays
Procedures
Step5
Click Run Task, above the DMP List table.
Step6
Click RS-232: Control supported, non-DMTech displays in the System Tasks drawer.
Step7
Click OK.
A message loads under the DMP Manager tab, confirming that DMM received your submission.
Step8
Stop. You have completed this procedure.
Related Topics
Elements to Activate RS-232 for Supported LCD Display Brands (except DMTech), page 15-37
Use RS-232 Syntax to Control Digital Signs
You can add and edit RS-232 commands that operate LCD displays or other presentation system types.
Before You Begin
Prepare your displays for centralized management via RS-232 commands.
Activate RS-232 command access for your displays.
Procedure
Step1
Click Network and Endpoints.
Step2
Choose Digital Media Players > Advanced Tasks.
Step3
Click System Tasks in the Application Types list.
Step4
Do one of the following.
Are you adding
(creating) a
command?
When you will define and save a new RS-232 command
a.
Click Add New Application.
The page is refreshed so that you can choose options and entervalues.
b.
Enter a name.
c.
Choose Set from the Request Type list.
d.
Enter an RS-232 command string in the Request field.