7-5
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter7 Cisco Hinter for RTSP
Procedures
Linux
•
Install Cisco Hinter on Linux, page 7-5
•
Run Cisco Hinter on Linux, page7-5

Install Cisco Hinter on Linux

Procedure
Step1
Open a command prompt where you decompressed the archive.
Step2
Type the command run Install.sh, and then press Enter.
Step3
Stop. You have completed this procedure.

Run Cisco Hinter on Linux

Procedure
Step1
Open a command prompt where you decompressed the archive.
Step2
Type the command run runHinter.sh, and then press Enter.
Step3
Enter the MPEG2-TS filename in the Source MPEG field.
OR
Click Browse or Choose File (depending on your browser) to find your MPEG2-TS file.
We populate the Output Name field automatically. It is identical to the name in the Source MPEG field
except that the filename extension is MOV and not MPG.
Step4
Click Generate, and then wait for the “Hinting finished successfully” message.
Step5
Find your hinted MOV output file in the ../hinted-files subdirectory.
Step6
Move or copy both the MPG file and its MOV derivative to the DSS root directory.
Step7
Stop. You have completed this procedure.