20-34
User Guide for Cisco Digital Media Suite 5.4.x
OL-15762-05
Chapter 20 Use Channels to Play Rich Media
Procedures
Step 3
Click a row in the All Channels table to highlight it. Then, click Edit ( ) where your highlighted row
meets the Actions column.
The Channels page now loads a sub-tab where you can edit attributes of the selected channel.
Step 4
Click the Time-specific Scheduling heading to start duplicating an event.
a.
Navigate to your event on the timeline.
b.
Click your event to highlight it on the timeline.
Details in the Event Information pane now describe your event.
Step 5
Click (Duplicate) in the Event Information pane.
Essential information about the highlighted event is now copied to your clipboard.
Tip Your computer pointer is changed, temporarily, to . However, it will return to its usual state after you complete
or cancel the duplication job.
Step 6
Paste the duplicate event into your channel by clicking any available time slot.
You can repeat this step as often as needed.
Step 7
Press Esc to clear your clipboard.
Step 8
Stop. You have completed this procedure.
Delete an Event from a Channel
Before You Begin
•
Your user account permissions must include content management (at Network and Endpoints >
Settings > User Accounts).
•
You must create channel events before you can delete them.
Procedure
Step 1
Click Content Management.
Step 2
Click Channels.