22-4
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter22 Plan for and Manage Emergencies
Procedures
Provision Emergency Assets to DMP Local Storage
Before You Begin
•
Create and save deployable messages for playback during emergencies.
Procedure
Step1
Click Network and Endpoints on the Home page.
Step2
Click DMP Manager.
Step3
Click the group (in the DMP Groups list) that should receive these assets.
Step4
Click Run Task.
The Run Task dialog box opens.
•
Use options in the top pane to add DMPs to, or remove them from, your emergency deployment.
•
Use options in the Select Task pane to filter which advanced tasks the table shows.
•
Use pagination controls under the table to control how many advanced tasks you see.
•
Use the Search function above the table to locate particular tasks quickly.
Step5
Click to highlight the best system tasks for the type of emergency.
Step6
Click OK.
The Run Task dialog box closes and a message tells you that your selected task was deployed.
•
DMM transfers assets to your DMPs.
•
DMM creates as many Go-to URL entries as the number of pr esentations and playlists that are part
of the deployment.
•
DMM applies the prefix “Alarm” to each of these Go-to URL entries.
Step7
Stop. You have completed this procedure.
Related Topics
•
Start Playback of an Emergency Message, page 22-5
•
Stop Playback of an Emergency Message, page 22-6