8-28
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter8 Authentication and Federated Identity
Procedures
What to Do Next
•OPTIONAL—
Would you like to associate a set of imported users with a new group?
Proceed to the “Derive User Group Membership Dynamically from an LDAP (Active Directory)
Filter” section on page 8-31.
•OPTIONAL—
Would you like to configure the schedule for synchronization?
Proceed to the “Define the LDAP (ActiveDirectory) Synchronization Schedule” section on
page 8-28.
Related Topics
•
Define LDAP (ActiveDirectory) Filters, page 8-24
•
Derive User Group Membership Dynamically from an LDAP (Active Directory) Filter, page8-31
•
Elements to Use LDAP Bookmarks for Synchronization, page 8-49
Define the LDAP (Active Directory) Synchronization Schedule
Before You Begin
•
Log in to DMM.
•
Choose LDAP or SSO as your authentication method.
•
Define LDAP filters and bookmarks.
Procedure
Step1
Click Administration.
Step2
Choose Security > Synchronize Users> Scheduling,
Step3
Choose between manual synchronization and automatic synchronization.
Note You will not see any of the elements that the “Elements for Bookmarks” table describes until after you define
at least one filter on the Define Filter property sheet.
Step4
Click Update.
The authentication settings that you changed are now in effect.
Step5
Stop. You have completed this procedure.
What to Do Next
•OPTIONAL—
Would you like to associate attribute names in DMS-Admin and Active Directory?
If so, proceed to the “Manage LDAP (ActiveDirectory) Attributes” section on page 8-29 .