15-16
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter15 Touchscreens, Projectors, and Displays
Procedures
Bootstrap NEC Displays to Enable Their RS-232 Support
You can use our DigitalSign s software to transmit instruction codes through your DMPs, and into their
attached presentation systems.
Note We do not maintain or control the RS-232 commands for any third-party equipment. Please check the manufacturer
documentation for your non-Cisco presentation systems to learn which RS-232 strings are engineered to manage them.
Procedure
Step1
Click Network and Endpoints.
Step2
Choose Digital Media Players > DMP Manager.
Step3
Use one of these methods, at your discretion, to limit the scope of what the DMP List table shows to you.
Step4
Click one DMP in the table to choose it exclusively.
OR
Use check boxes to choose multiple DMPs whose attached presentation system s are all identical.
•
Limit the scope
by filtering.
(Optional)
When you will filter against an attribute value
a.
Choose a DMP attribute type from the Filter list.
You can filter by DMP name, description, IPaddress, MAC address, or
any other supported attribute.
b.
Enter an actual value to filter against the attribute type that you chose.
Had you chosen to filter against the Description attribute, for example,
you might now enter a word like ‘classroom’ or ‘billboard’ as the value
to match.
c.
Click Go.
d.
Proceed to Step3.
•
Limit the scope
by browsing.
(Optional)
When you will browse by DMP group
a.
Browse in the DMP Groups tree to restrict what the DMPList
table shows.
b.
Proceed to Step3.