Cisco Systems 5.4.x

14-7

User Guide for Cisco Digital Media Manager 5.4.x

OL-15762-05

Chapter14 Configure DMP Wi-Fi Settings

Reference

Step5

Choose from the Security list the security method for your network. The options are:

•

WEP-64bit

•

WEP-128bit

•

WPA-PSK

•

WPA-EAP

•

WPA2-PSK

•

WPA2-EAP

The security method that you choose controls, in part, which other fields and options you see.

Step6

Do the following, as needed.

•

Did you choose a WEP-based security method? And do you see the Passph rase field? If so, enter in

it the key from which your 64-bit or 128-bit passphrase is cryptographically derived.

•

Did you choose a WPA-based or WPA-2-based security method? And do you see the Passphrase

field? If so, enter in it the pre-shared key for your network.

•

Do you see the Encryption list? If so, choose from it either TKIP or CCMP.

•

Do you see the EAP list? If so, choose from it either FAST, MD5, or PEAP (ver.0).

•

Do you see the Username and Password fields? If so, enter in them respectively a valid username

for your wireless network and the password to authenticate that username.

Step7

Click Submit to save this application.

Step8

Deploy this application to your DMPs, as appropriate.

•

Immediately—Click the DMP Manager tab, choose which DMPs to reconfigure, choose this

named application from the “W-Fi Configuration” options in the Actions list, and then click Go.

•

In the future—Click the Schedules tab and define deployment parameters for this application.

Step9

Verify that your DMPs have IP addresses as nodes on the wireless network.

Step10

After the deployment is successful, unplug the Ethernet cables from your DMPs.

Otherwise, their Ethernet connections will take priority over their Wi-Fi connections.

Step11

After you unplug their Ethernet cables, restart these DMPs.

Step12

Stop. You have completed this procedure.