19-22
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter19 Content Distribution and Delivery
Procedures
Step5
Choose the mount point for this deployment. You can choose only one.
•
Flash Storage (also known as usb_1) is the SD memory card installed inside a DMP.
•
USB (also known as usb_2) is an external USB hard drive or flash memory drive that is attached to
a DMP.
Tip To learn which external USB drives we support and have tested, see Cisco DMS compatibility information
on Cisco.com. http://www.cisco.com/en/US/products/ps6681/products_device_support_tables_list.html.
Step6
Does this job consist of assets for an emergency notification?
•
If so, check the Emergency/Alarm check box.
•
If not, uncheck it.
Step7
Populate the deployment package.
a.
Click an application type in the Applications list.
b.
Check at least one saved application in the Available Applications table.
c.
Click Select Application.
Step8
Click Submit.
Step9
Use the Channels feature to schedule deployment of this package to your DMPs that should receive it.
Then, wait for the file transfer tofinish.
Tip DMS-CD does not prevent you from using the Run Task feature to start transferring a DMS-CD deployment
package immediately. However, its immediacy defeats many of the most important benefits of using DMS-CD. We
recommend instead that you use the Channels feature to schedule all of your DMS-CD deployment packages.
Bandwidth capacity in your WAN determines how long you must wait. After the deployment is finished,
Cisco Digital Signs autogenerates the (Go To) URL action for this deployment package.
Step10
Choose Digital Media Players > Advanced Task > (Go to) URL.
Step11
Check that a (Go to) URL application was derived from your deployment task.