28-4
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter28 Emula te the DMP Remote Control for Use with Cisco Cast
Procedures
Procedures
In Cisco Unified Communications Manager
•
Activate Services, page 28-4
•
Start Services, page28-5
•
Configure URL Parameters, page 28-5
•
Enable IP Phone Autoregistration, page 28-6
•
Define IP Phone Service Attributes, page28-6
•
Expose the Service to IP Phones, page 28-7
In CiscoCast
•
Configure Emulator Settings in Cast, page 28-8
On Phones
•
Configure an IP Phone to Emulate the Remote Control, page 28-10
•
Start the Emulator on an IP Phone, page 28-10
•
Start the Emulator on a Mobile Phone, page 28-11
•
Use the Emulator on an IP Phone or a Mobile Phone, page 28-12
Activate Services
Procedure
Step1
Log in to Cisco Unified Communications Manager Administration.
Step2
Choose Cisco Unified Serviceability from the Navigation list. Then, clickGo.
Step3
Choose Tools> Service Act ivation.
Step4
Examine the Server list.
Step5
Choose from it a server that should support remote control emulation.
Step6
Click Go.
Step7
Check the Check All Services check box.
Step8
Click Save. Then, click OK.
Step9
Stop. You have completed this procedure.
What to Do Next
•
Proceed to the “Start Services” section on page 28-5.