28-2
UserGuide for Cisco Digital Media Manager5.4.x
OL-15762-05
Chapter28 Emula te the DMP Remote Control for Use with Cisco Cast
Concepts
Restrictions
•
Audio Muting Restrictions, page 28-2
•
Channel-Changing Restrictions, page 28-2
•
User Permissions Restrictions, page 28-2
•
DMP Model Restrictions, page 28-2
Audio Muting Restrictions
When your DMP 4400G connects from its SPDIF audio interface to an external display or receiver, your
DMP remote control cannot mute the audio. (CSCty77943; CSCth12215)
Channel-Changing Restrictions
•
When you use a handheld or emulated remote control to operate the C isco Cast EPG for a
DMP 4400G, avoid changing channels more than once in 3seconds. Otherwise, the DMP must
queue your repeated commands to a buffer and then call them sequentially for processing. This
operation can cause a visible lag, during which your display goes black for a split-second
(CSCtn04167).
•
Remote control keymapping falls out of sync when you change a button’s “keypress” MIB value
more than 208 times without restarting your DMP (CSCsr61876). Until you have restarted your
DMP, any subsequent attempts to change the “keypress” MIB of the affected button will not have
any effect.
User Permissions Restrictions
Note Features of CiscoCa st are hidden from you until your user role assignment is APPLICATION MANAGER and you have
explicit WRITE permissions (CSCtr05337).
DMP Model Restrictions
Note We do not support remote control emulation on a DMP 4310G.