Cisco Systems UBR900 specifications Debug Commands

Debug Commands

Debug Commands

Note Troubleshooting the Cisco uBR900 series cable access router is typically accomplished using the CMTS at the cable operator’s headend facility; it is rarely done by directly accessing the Cisco uBR924. For information on troubleshooting the Cisco uBR900 series using Cisco uBR7200 series universal broadband routers, see the document Cisco uBR7246 Universal Broadband Router Features. Also see the “Related Documents” section on page 31 for additional documents relating to troubleshooting.

The following debug commands are available to troubleshoot a Cisco uBR900 series cable access router:

•debug cable-modem bpkm

•debug cable-modem bridge

•debug cable-modem error

•debug cable-modem interrupts

•debug cable-modem mac

•debug cable-modem map

All commands relating to VoIP applications are documented in the Debug Command Reference for Cisco IOS Release 12.0, which can be accessed online or on the Documentation CDROM by going to Cisco IOS Release 12.0 and selecting Supporting Documents.

Note Hidden debug commands for the Cisco uBR900 series cable access router are not documented.

118Cisco IOS Release 12.0(7)T