Feature Overview
Cisco IOS Software Feature Sets
This section briefly describes the common feature sets supported by the Cisco uBR900 series cable access routers. Each feature set contains a number of features that provide a specific functionality such as Voice over IP (VoIP) or virtual private network (VPN) access.
The following feature set categories are currently available:
•
•
Data Operations
Data and Voice Operations
The data and voice feature sets add Voice over IP (VoIP) support to the same base features contained in the data only feature sets. Telephones that are connected to the uBR924 cable access router can make voice calls over the Internet using either the H.323 (Gateway/Gatekeeper) voice control protocol or Simple Gateway Control Protocol (SGCP). (For more information on these protocols, refer to H.323 Protocol Stack and SGCP Protocol Stack in this document.)
Because voice calls are
Note Voice features are available only on the Cisco uBR924 cable access router.
Note Feature sets and software images vary depending on the cable access router model you are using and the Cisco IOS software release that is running. For a list of the available software images for your application, and the specific features contained in each image, refer to the release notes for the Cisco uBR900 series cable access router and Cisco IOS software release you are using. This document describes the features available for the Cisco uBR904 and uBR924 cable access routers in Cisco IOS Release 12.0(7)T.
The following feature sets are available in data and voice versions as well as in data only versions:
•Base IP Bridging – provides full DOCSIS
•Home Office (Easy IP) – provides a
•Small Office – provides a firewall feature set in addition to the
•Telecommuter – provides encryption and layer 2 tunneling support in addition to the
These feature sets are described in the following sections.
2Cisco IOS Release 12.0(7)T