|
|
| show controllers |
| Table 10 | Possible but Uncommon Cable Interface Reset Causes (continued) | |
|
|
|
|
| Message |
| Description |
|
|
| |
| CMAC_LOG_RESET_SERVICE_NOT_AVAILABLE | The CMTS has failed the Cisco uBR900 series’ | |
|
|
| registration because a required or requested class of |
|
|
| service is not available. |
|
|
| |
| CMAC_LOG_RESET_T6_RETRIES_EXHAUSTED | The CMTS failed too many times to respond to a | |
|
|
| |
|
|
| |
| CMAC_LOG_RESET_MAINTENANCE_WATCHDOG_DRIVER | The Cisco uBR900 series MAC layer failed to detect a | |
|
|
| change in the interface driver. |
|
|
| |
| CMAC_LOG_RESET_NET_ACCESS_MISSING | The Network Access parameter is missing from the | |
|
|
| DOCSIS configuration file. |
|
|
| |
| CMAC_LOG_RESET_FAILED_WRITE_ACCESS_CONTROL | The Cisco uBR900 series was unable to set the Write | |
|
|
| Access Control for an SNMP parameter as specified by |
|
|
| the DOCSIS configuration file. |
|
|
| |
| CMAC_LOG_RESET_DHCP_FAILED | The DHCP server did not respond with all the required | |
|
|
| values. The required values are: IP address, network |
|
|
| mask, TFTP server IP address, TOD server IP address, |
|
|
| DOCSIS configuration file name, and time zone offset. |
|
|
| |
| CMAC_LOG_RESET_CANT_START_DS_TUNER_PRCESS | The Cisco uBR900 series was unable to start the internal | |
|
|
| process used to manage the downstream tuner. |
|
|
| |
| CMAC_LOG_RESET_TOO_MANY_DS_LOCKS_LOST | Downstream QAM/FEC lock has been lost too many | |
|
|
| times. |
|
|
| |
| CMAC_LOG_RESET_NO_SEND_TO_DS_TUNER_PROCESS | The Cisco uBR900 series | |
|
|
| to communicate with the downstream tuner management |
|
|
| process. |
|
|
| |
| CMAC_LOG_RESET_DS_TUNER_WATCHDOG | The downstream tuner process failed to report its | |
|
|
| continuing operation for a long period of time. |
|
|
| |
| CMAC_LOG_RESET_UNABLE_TO_SET_MIB_OBJECT | The Cisco uBR900 series was unable to set an SNMP | |
|
|
| parameter as specified by the DOCSIS configuration file. |
|
|
| |
| CMAC_LOG_RESET_MIB_OBJECT_PROCESS_WATCHDOG | The internal MIB object took too long to process the | |
|
|
| entries in the DOCSIS configuration file. |
|
|
|
|
Configuring the Cisco uBR900 Series Cable Access Routers 93