Cisco Systems UBR900 specifications VoIP Bridging Configuration Using Sgcp

Configuration Examples

VoIP Bridging Configuration Using SGCP

In this example, Cisco uBR924 is configured to support VoIP in bridging mode using SGCP. Note the following in the sample configuration file:

•

•

•

SGCP is enabled.

The call agent IP address is specified.

The SGCP application is specified for each port.

To configure this application via DHCP, the following fields must also be set:

•

•

•

•

Host name

Domain name

Domain Name System (DNS) server

Merit dump file — S:0:<call agen FQDN>:S:1<call agent FQDN>

Current configuration:

!

!Last configuration change at 16:30:00 - Thu Dec 16 1999

version 12.1 no service pad

service timestamps debug uptime service timestamps log uptime no service password-encryption

hostname art1

clock timezone - 0 6 ip subnet-zero

no ip routing

ip domain-name cisco.com ip name-server 4.0.0.32

sgcp

xgcp snmp sgcp

voice-port 0

voice-port 1

dial-peer voice 100 pots application SGCPAPP port 0

dial-peer voice 101 pots application SGCPAPP port 1

process-max-time 200

interface Ethernet0

ip address 188.186.1.14 255.255.0.0 no ip directed-broadcast

no ip route-cache no ip mroute-cache bridge-group 59

bridge-group 59 spanning-disabled

52Cisco IOS Release 12.0(7)T