Cisco Systems UBR900 Debug cable-modem interrupts, UBR924# debug cable-modem interrupts

debug cable-modem interrupts

debug cable-modem interrupts

To debug Cisco uBR900 series interrupts, use the debug cable-modem interrupts command in privileged EXEC mode . To turn the debugging messages off, use the no form of this command.

[no] debug cable-modem interrupts

Syntax Description

This command has no keywords or arguments.

Defaults

No default behavior or values.

Command Modes

Privileged EXEC

Command History

ReleaseModification

11.3 NA This command was introduced.

Examples

The following example shows sample debug output for Cisco uBR900 series interrupts.

uBR924# debug cable-modem interrupts

*** BCM3300_rx_mac_msg_interrupt ***

*** BCM3300_rx_mac_msg_interrupt ***

### BCM3300_tx_interrupt ###

*** BCM3300_rx_mac_msg_interrupt ***

### BCM3300_tx_interrupt ###

*** BCM3300_rx_mac_msg_interrupt ***

### BCM3300_tx_interrupt ###

### BCM3300_tx_interrupt ###

### BCM3300_tx_interrupt ###

### BCM3300_tx_interrupt ###

Configuring the Cisco uBR900 Series Cable Access Routers 125