show controllers cable-modem filters

show controllers cable-modem filters

To display the registers in the MAC hardware that are used for filtering received frames, use the show controllers cable-modem filters command in privileged EXEC mode.

show controllers cable-modem number filters

Syntax Description

number

Controller number inside the Cisco uBR900 series.

Defaults

No default behavior or values.

Command Modes

Privileged EXEC

Command History

ReleaseModification

11.3 NA

This command was introduced.

 

 

Usage Guidelines

Some of the filtering parameters are MAC hardware addresses, Service IDs (SIDs), and upstream channel IDs.

Configuring the Cisco uBR900 Series Cable Access Routers 81

Page 81
Image 81
Cisco Systems UBR900 specifications Show controllers cable-modem filters