Cisco Systems UBR900 show controllers cable-modem des

show controllers cable-modem des
Configuring the Cisco uBR900 Series Cable Access Routers 79
show controllers cable-modem des
To display information about the Data Encryption Standard (DES) engine registers, use the show
controllers cable-modem des command in privileged EXEC mode.
show controllers cable-modem number des
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Examples
DES engine registers are displayed in the following example:
uBR924# show controllers cable-modem 0 des
downstream des:
ds_des_key_table:
key 0: even 0, odd 0
key 1: even 0, odd 0
key 2: even 0, odd 0
key 3: even 0, odd 0
ds_des_cbc_iv_table:
iv 0: even 0, odd 0
iv 1: even 0, odd 0
iv 2: even 0, odd 0
iv 3: even 0, odd 0
ds_des_sid_table:
sid_1=0x0000, sid_2=0x0000, sid_3=0x0000, sid_4=0x0000
ds_des_sid_enable=0x80, ds_des_ctrl=0x2E
ds_des_sv=0x0F00
ds_unencrypted_length=0x0C
upstream des:
us_des_key_table:
key 0: even 0, odd 0
key 1: even 0, odd 0
key 2: even 0, odd 0
key 3: even 0, odd 0
us_des_cbc_iv_table:
iv 0: even 0, odd 0
iv 1: even 0, odd 0
iv 2: even 0, odd 0
iv 3: even 0, odd 0
number Controller number inside the Cisco uBR900 series.
Release Modification
11.3 NA This command was introduced.