interface cable-modem
Configuring the Cisco uBR900 Series Cable Access Routers 67
interface cable-modem
To specify the cable interface on a Cisco uBR900 series cable access router, enter the interface
cable-modem command from global configuration mode.
interface cable-modem number
Syntax Description
Defaults
Disabled
Command Modes
Global configuration
Command History
Usage Guidelines
When this command is entered, the Cisco uBR900 series cable access router switches from global
configuration mode to interface configuration mode.
Examples
The following example brings up cable access router interface 0 and displays the available
cable-modem interface configuration commands:
uBR924(config)# interface cable-modem 0
uBR924(config-if)# cable-modem ?
compliant Enter compliant modes for interface
downstream Downstream channel characteristics
fast-search Enable/disable the DS fast search
upstream upstream channel characteristics
voip Options for Voice over IP traffic over the cable interface
uBR924(config-if)#
number The interface number of the cable interface on the rear panel of the cable access
router.
Release Modification
11.3 NA This command was introduced.