Step 3: Configuring the Router
2.3 Step 3: Configuring the Router
In this Step, you will configure the Corinex Powerline Router to communicate with the Internet through your Internet Service Provider (ISP). For this you will need the setup information provided by your ISP. If you do not have this information already, you have to contact your ISP before proceeding.
This information from your ISP was used to configure your computer for Internet access. Because you are now sharing Internet access between several computers, you will use this setup information from your ISP to configure the Corinex Powerline Router instead of your computer.
Note: You only need to configure the Corinex Powerline Router only once using the first computer you set up.
A. Open your web browser. (You can get an error message at this point. Ignore it.) Enter http://192.168.1.1 in the web browser’s Address field. Press the Enter key.
http://192.168.1.1 | 35 |
|
