Corinex Global Powerline Router manual Powerline Tabs Network Encryption Key

Powerline Tabs

Network Encryption Key

Select the Network Encryption Key tab from the Powerline tabs. The following screen will appear:

Fig.3.11 Network Encryption Key 50

The Corinex Powerline Router is configured to work seamlessly with other Corinex Powerline products right out of the box.

All Powerline devices must use the same powerline password, if they should communicate together over powerline.

If the passwords are not the same, reconfigure the devices to ensure that all devices have the same passwords.

Note: For Corinex Powerline Router, the default Network Encryption Key is "HomePlug". The 56-bit DES encryption is always enabled for Powerline data security as default.

This screen enables you to change the powerline password settings of the embedded powerline adapter in the Router. You can choose which adapter you want to configure in the Local Powerline Adapter field, then choose whether you want to encrypt frames in the Encrypt frames checkbox. If you selected Encrypt frames, you can enter the powerline password for your adapter. The password can be 4-24 characters long. Press the Apply button, when you want to enter the values into the Router.

Corinex Powerline Router User Guide