Compuprint PageMaster 402N User Guide
Loading Paper into the High Capacity Feeder
Correct Paper Storage
It is important to store paper correctly prior to placing it in the printer, since improper storage can cause frequent paper jams and poor print quality. Use the following guidelines when storing paper for use in the printer:
•Store reams of paper on a flat surface, and always store them stacked horizontally.
•Store reams of paper in an area away from both direct sunlight and high humidity
•Open sealed reams only when you are ready to load the paper into the paper tray, and always close and seal partial reams of paper.
•Do not stack partial reams of paper
Print Media Weight, Type, and Size
The following table defines print media that you can use in the high capacity feeder, and also indi- cates the feed
Paper Source | Weight | Paper Type and Feed | Paper Sizes |
|
| Direction | Accommodated |
|
|
|
|
High Capacity Feeder | 16 to 24 lbs. | A4 LEF | 297 x 210mm |
| 60 to 135 g/m2 |
| 11.7 x 8.27 inches |
|
| Letter LEF | 279.4 x 215.9mm |
|
|
| 11 x 8.5 inches |
|
|
|
|
Loading Paper into the High Capacity Feeder
Use the following procedure to load paper into the high capacity feeder:
NOTE: The high capacity feeder accommodates only A4 or letter size paper.
1.Pull the high capacity feeder tray out until it stops. Do not reach into the tray with your hand until the tray is completely lowered.
2.Adjust the paper guides to fit the desired paper size by lifting the paper guides and inserting them into the appropriate guide holes.
Apr 02
