Datalogic Scanning 7000 manual User Specified Intercharacter Delay, Interfunction Delay

Programming Chart

ASCII Conversion

Intercharacter, Interfunction, and Intermessage Delays

User Specified Intercharacter Delay

An intercharacter delay of up to 495 milliseconds may be placed after the transmission of a particular character of scanned data. Scan the Delay Length bar code below, then scan the number of milliseconds and the SAVE bar code using the Programming Chart on page B-5of this manual.

Next, scan the Character to Trigger Delay bar code, then the 2-digit hex value for the ASCII character that will trigger the delay

Chart (Code Page 1252) on page A-4.

Delay Length

Character to Trigger Delay

To remove this delay, scan the Delay Length bar code, and set the num- ber of steps to 0. Scan the SAVE bar code using the

on page B-5of this manual.

Interfunction Delay

An interfunction delay of up to 495 milliseconds may be placed between the transmission of each segment of the message string. Scan the Inter- function Delay bar code below, then scan the number of milliseconds and the SAVE bar code using the Programming Chart on page B-5of this manual.

Prefix

Scanned Data

Suffix

STX 1 HT 2 3 4 5 CR LF

Interfunction Delays

Interfunction Delay

To remove this delay, scan the Interfunction Delay bar code, then set the number of steps to 0. Scan the SAVE bar code using the Programming Chart on page B-5 of this manual.

Product Reference Guide 4-7