Datalogic Scanning 7000 manual Linear Symbologies, All Symbologies, Message Length Description

Symbologies

Linear Symbologies

All Symbologies

If you want to decode all the symbologies allowable for your imager, scan the All Symbologies On code. If on the other hand, you want to decode only a particular symbology, scan All Symbologies Off followed by the On symbol for that particular symbology.

All Symbologies On

All Symbologies Off

Message Length Description

You are able to set the valid reading length of some of the bar code sym- bologies. If the data length of the scanned bar code doesn’t match the valid reading length, the imager will issue an error beep. You may wish to set the same value for minimum and maximum length to force the imager to read fixed length bar code data. This helps reduce the chances of a misread.

EXAMPLE: Decode only those bar codes with a count of 9-20 charac- ters.

Min. length = 09Max. length = 20

EXAMPLE: Decode only those bar codes with a count of 15 charac- ters.

Min. length = 15Max. length = 15

For a value other than the minimum and maximum message length defaults, scan the bar codes included in the explanation of the symbol- ogy, then scan the digit value of the message length and Save bar codes on the Programming Chart on page B-5 of this manual. The minimum and maximum lengths and the defaults are included with the respective symbologies.

6-2 PowerScan® 7000 2D