Datalogic Scanning 7000 manual Decode Search Mode, This search mode is the default setting

Output

Scan Centering On, then scan one of the following bar codes to change the top, bottom, left, or right of the centering window. Then scan the percent you want to shift the centering window using digits on the Pro- gramming Chart on page B-5. Scan Save. Default Centering = 40% for Top and Left, 60% for Bottom and Right.

Centering On

* Centering Off

Top of Centering Window

Bottom of Centering Window

Left of Centering Window

Right of Centering Window

Decode Search Mode

There are three selectable decode (scanning) modes:

Full Omnidirectional - Searches for bar code features beginning at the center of an image, and searches to the image’s limits. This mode reads all symbologies (including OCR), in any orientation. The Full Omnidi- rectional search is very thorough which may slow performance time.

This search mode is the default setting.

NOTE

Full Omnidirectional

3-16 PowerScan® 7000 2D