Datalogic Scanning 7000 manual RS-232 Receiver Time-Out

Programming Chart on page B-

Terminal Interfaces

RS-232 Receiver Time-Out

The unit stays awake to receive data until the RS-232 Receiver Time- Out expires. A manual or serial trigger resets the time-out. When an RS-232 receiver is sleeping, a character may be sent to wake up the receiver and reset the time-out. A transaction on the CTS line will also wake up the receiver. The receiver takes 300 milliseconds to completely come up. Change the RS-232 receiver time-out by scanning the bar code below, then scanning digits from the

5 of this manual, then scanning Save. The range is 0 to 300 seconds. Default = 0 seconds (no time-out - always on).

RS-232 Receiver Time-Out

2-10 PowerScan® 7000 2D